WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - Incorporating all

amendments by legislation made to 31 August 1980

- Reprinted as at 31 August 1980 (HISTREG CHAP 144 #DATE 31:08:1980)*1* The Weights and Measures (National Standards) Regulations (in force under

the Weights and Measures (National Standards) Act 1960) as shown in this reprint comprise Statutory Rules 1961 No. 142 as amended by the other Statutory Rules

specified in the following table:

---------------------------------------------------------------------------- Date of Application,

saving

Year and notification in Date of or transitional

number Gazette commencement provisions

---------------------------------------------------------------------------- 1961 No. 142 27 Nov 1961 27 Nov 1961 (a)

1963 No. 126 12 Dec 1963 12 Dec 1963 -

1964 No. 146 3 Dec 1964 3 Dec 1964 -

1965 No. 13 4 Feb 1965 4 Feb 1965(b) -

1968 No. 150 5 Dec 1968 5 Dec 1968 -

1970 No. 40 2 Apr 1970 2 Apr 1970 -

1972 No. 62 11 May 1972 11 May 1972 -

133 10 Aug 1972 10 Aug 1972 -

160 5 Oct 1972 5 Oct 1972 -

1973 No. 68 29 Mar 1973 29 Mar 1973 -

253 13 Dec 1973 13 Dec 1973 -

1977 No. 150 8 Sept 1977 8 Sept 1977 -

1979 No. 65 27 Apr 1979 27 Apr 1979 -

---------------------------------------------------------------------------- (a) Part II (regulations 4-76) was expressed to take effect on 1 January

1964. That date was progressively extended to 1 January 1965 and 1 January 1966

by Statutory Rules 1963 No. 126 and 1964 No. 146 respectively.

Part II was substituted by Statutory Rules 1979 No. 65 r. 2.

(b) Regulation 1 of Statutory Rules 1965 No. 13 provides as follows:

"1. Regulations 4 to 17 (inclusive), and sub-regulations (1) to (4)

(inclusive) of regulation 23 of, and Parts I to IV (inclusive) of the Schedule

to, these Regulations shall take effect on the date on which Part II of the

Weights and Measures (National Standards) Regulations takes effect."

See paragraph (a) above.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - TABLE OF PROVISIONS

## TABLE

TABLE OF PROVISIONS

PART I-PRELIMINARY

Regulation

1. Citation

2. (Repealed)

3. Interpretation

PART II-UNITS OF MEASUREMENT

Division 1-Length

4. Units of measurement of length

5. The metre

Division 2-Area

6. Units of measurement of area

7. The square metre

Division 3-Mass

8. Units of measurement of mass

9. The kilogram

Division 4-Volume

10. Units of measurement of volume

11. The cubic metre

Division 5-Density

12. Units of measurement of density

13. The kilogram per cubic metre

Division 6-Angle

14. Units of measurement of plane angle

15. The radian

16. The degree

17. Conversion factor

18. Unit of measurement of solid angle

19. The steradian

Division 7-Time interval

20. Units of measurement of time interval

21. The second

Division 8-Frequency

22. Units of measurement of frequency

23. The hertz

Division 9-Velocity and speed

24. Units of measurement of velocity and speed

25. The metre per second

Division 10-Acceleration

26. Units of measurement of acceleration

27. The metre per second squared

Division 11-Force

28. Units of measurement of force

29. The newton

Division 12-Work and energy

30. Units of measurement of work and energy

31. The joule

Division 13-Power

32. Units of measurement of power

33. The watt

Division 14-Pressure

34. Units of measurement of pressure

35. The pascal

Division 15-Viscosity and Kinematic Viscosity

36. Units of measurement of viscosity and kinematic viscosity

37. The pascal second

38. The square metre per second

Division 16-Electric current

39. Units of measurement of electric current

40. The ampere

Division 17-Electric charge

41. Units of measurement of electric charge

42. The coulomb

Division 18-Potential difference and electromotive force

43. Units of measurement of potential difference and electromotive

force

44. The volt

Division 19-Electrical resistance

45. Units of measurement of electrical resistance

46. The ohm

Division 20-Electrical conductance

47. Units of measurement of electrical conductance

48. The siemens

Division 21-Electrical capacitance

49. Units of measurement of electrical capacitance

50. The farad

Division 22-Electrical inductance

51. Units of measurement of electrical inductance

52. The henry

Division 23-Temperature

53. Units of measurement of temperature

54. The kelvin and the degree Celsius

Division 24-Luminous intensity

55. Units of measurement of luminous intensity

56. The candela

Division 25-Luminous flux

57. Units of measurement of luminous flux

58. The lumen

Division 26-Illuminance

59. Units of measurement of illuminance

60. The lux

Division 27-Luminance

61. Units of measurement of luminance

62. The candela per square metre

Division 28-Activity (radionuclides)

63. Units of measurement of activity

64. The becquerel

Division 29-Exposure (ionizing radiation)

65. Units of measurement of exposure

66. The coulomb per kilogram

Division 30-Absorbed dose, absorbed dose index, kerma and specific energy imparted (ionizing radiation)

67. Units of measurement of absorbed dose, absorbed dose index, kerma

and specific energy imparted

68. The gray

69-76. (Repealed)

PART III-STANDARDS OF MEASUREMENT

77. Verifying authorities

78. Marks to be stamped on or affixed to standards of measurement

78A. Verification, &c., of standards of measurement referred to in

section 8 of the Act

79. Verification, &c., of standards of measurement to which section 9

of the Act applies

80. Verification, &c., of standards of measurement as subsidiary

standards

80A. Certificates as evidence

81. Cancelling of certificates

82. Permissible variations in certain subsidiary standards of

measurement-Schedule 31

83. Permissible variations in certain subsidiary standards of

measurement-Schedule 32

THE SCHEDULES

SCHEDULE 1

Units of measurement of length

SCHEDULE 2

Units of measurement of area

SCHEDULE 3

Units of measurement of mass

SCHEDULE 4

Units of measurement of volume

SCHEDULE 5

Units of measurement of density

SCHEDULE 6

Units of measurement of plane angle

SCHEDULE 7

Units of measurement of time interval

SCHEDULE 8

Units of measurement of frequency

SCHEDULE 9

Units of measurement of velocity and speed

SCHEDULE 10

Units of measurement of acceleration

SCHEDULE 11

Units of measurement of force

SCHEDULE 12

Units of measurement of work and energy

SCHEDULE 13

Units of measurement of power

SCHEDULE 14

Units of measurement of pressure

SCHEDULE 15

Units of measurement of viscosity and kinematic viscosity

SCHEDULE 16

Units of measurement of electric current

SCHEDULE 17

Units of measurement of electrical charge

SCHEDULE 18

Units of measurement of potential difference and electromotive force

SCHEDULE 19

Units of measurement of electrical resistance

SCHEDULE 20

Units of measurement of electrical conductance

SCHEDULE 21

Units of measurement of electrical capacitance

SCHEDULE 22

Units of measurement of electrical inductance

SCHEDULE 23

Units of measurement of temperature

SCHEDULE 24

Units of measurement of luminous intensity

SCHEDULE 25

Units of measurement of luminous flux

SCHEDULE 26

Units of measurement of illuminance

SCHEDULE 27

Units of measurement of luminance

SCHEDULE 28

Units of measurement of activity (radionuclides)

SCHEDULE 29

Units of measurement of exposure (ionizing radiation)

SCHEDULE 30

Units of measurement of absorbed dose, absorbed dose index, kerma and specific

energy imparted (ionizing radiation)

SCHEDULE 31

Permissible variation upon verification or reverification of certain subsidiary

standards of measurement

SCHEDULE 32

Permissible variation upon verification or reverification of certain subsidiary

standards of measurement that are constructed of iron

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 1.

Citation

PART I-PRELIMINARY

1. These Regulations may be cited as the Weights and Measures (National Standards) Regulations.*1*

Regulation 2 repealed by 1977 No. 150 r. 1

* * * * * * * *

See notes to first article of this Chapter.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 3.

InterpretationSub-reg. (1) amended by 1965 No. 13 r. 3; 1977 No. 150 r. 2

3. (1) In these Regulations, unless the contrary intention appears-

"the Act" means the Weights and Measures (National Standards) Act 1960;

"time interval" means time interval not related to the calendar;

"verifying authority ", in relation to the verification or reverification of a standard of measurement, means a person who is a verifying authority in relation to the verification and reverification of such a standard of measurement by virtue of an appointment under regulation 77.

Sub-reg. (2) omitted by 1977 No. 150 r. 2

* * * * * * * *

Substituted by 1979 No. 65 r. 1

(3) For the purposes of these Regulations, a symbol specified in Column 4 of the Schedule that is formed by the algebraic combination of symbols of other units may also be expressed using appropriate negative exponents.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 4.

Units of measurement of length

PART II-UNITS OF MEASUREMENT

Division 1-Length

Part II substituted by 1979 No. 65 r. 2

Substituted by 1979 No. 65 r. 2

4. (1) The units of measurement of length are the units specified in Column 2 of Schedule 1.

(2) A unit of measurement specified in an item in Schedule 1 is related to the metre as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 1 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 5.

The metreSubstituted by 1979 No. 65 r. 2

5. The metre is the length equal to 1 650 763.73 wave-lengths in vacuum of the

radiation corresponding to the transition between the levels 2p*10* and 5d*5* of the krypton-86 atom.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 6.

Units of measurement of area

Division 2-Area

Substituted by 1979 No. 65 r. 2

6. (1) The units of measurement of area are the units specified in Column 2 of Schedule 2.

(2) A unit of measurement specified in an item in Schedule 2 is related to the square metre as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 2 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 7.

The square metreSubstituted by 1979 No. 65 r. 2

7. The square metre is the area of a square each side of which is 1 metre in length. Division 3-Mass

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 8.

Units of measurement of massSubstituted by 1979 No. 65 r. 2

8. (1) The units of measurement of mass are the units specified in Column 2 of Schedule 3.

(2) A unit of measurement specified in an item in Schedule 3 is related to the kilogram as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 3 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 9.

The kilogramSubstituted by 1979 No. 65 r. 2

9. The kilogram is the mass of the cylinder that-

(a) is deposited in the International Bureau of Weights and Measures; and

(b) was declared by the First General Conference on Weights and Measures held in Paris in the year 1889 to be the International Prototype Kilogram.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 10.

Units of measurement of volume

Division 4-Volume

Substituted by 1979 No. 65 r. 2

10. (1) The units of measurement of volume are the units specified in Column 2 of Schedule 4.

(2) A unit of measurement specified in an item in Schedule 4 is related to the cubic metre as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 4 may be referred to by the symbol in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 11.

The cubic metreSubstituted by 1979 No. 65 r. 2

11. The cubic metre is the volume of a cube each side of which is 1 metre in length.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 12.

Units of measurement of density

Division 5-Density

Substituted by 1979 No. 65 r. 2

12. (1) The units of measurement of density are the units specified in Column 2 of Schedule 5.

(2) A unit of measurement specified in an item in Schedule 5 is related to the kilogram per cubic metre as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 5 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 13.

The kilogram per cubic metreSubstituted by 1979 No. 65 r. 2

13. The kilogram per cubic metre is the density of a uniform substance a mass of 1 kilogram of which occupies a volume of 1 cubic metre. Division 6-Angle

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 14.

Units of measurement of plane angleSubstituted by 1979 No. 65 r. 2

14. (1) The units of measurement of plane angle are the units specified in Column 2 of Schedule 6.

(2) A unit of measurement specified in an item in Schedule 6 is related to the radian as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 6 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 15.

The radianSubstituted by 1979 No. 65 r. 2

15. The radian is the plane angle between 2 radii of a circle that cut off on the circumference an arc equal in length to the radius.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 16.

The degreeSubstituted by 1979 No. 65 r. 2

16. The degree is the plane angle between 2 radii of a circle that cut off on the circumference an arc that is 1/360 of the circumference.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 17.

Conversion factorSubstituted by 1979 No. 65 r. 2

17. (1) For all legal purposes 1 degree shall be deemed to be equal to #180 radians, where # is the ratio of the circumference of a circle to the diameter of that circle. (2) For the purposes of this regulation the ratio of the circumference of a circle to the diameter of that circle shall be deemed to be equal to 3.141 592 654.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 18.

Unit of measurement of solid angleSubstituted by 1979 No. 65 r. 2

18. (1) The unit of measurement of solid angle is the steradian.

(2) The steradian may be referred to by the symbol "sr ".

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 19.

The steradianSubstituted by 1979 No. 65 r. 2

19. The steradian is the solid angle that has its vertex in the centre of a sphere and cuts off an area of the surface of the sphere equal to that of a square with sides of length equal to the radius of the sphere.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 20.

Units of measurement of time interval

Division 7-Time interval

Substituted by 1979 No. 65 r. 2

20. (1) The units of measurement of time interval are the units specified in Column 2 of Schedule 7.

(2) A unit of measurement specified in an item in Schedule 7 is related to the second as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 7 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 21.

The secondSubstituted by 1979 No. 65 r. 2

21. The second is the duration of 9 192 631 770 periods of the radiation corresponding to the transition between the 2 hyperfine levels of the ground state of the caesium-133 atom.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 22.

Units of measurement of frequency

Division 8-Frequency

Substituted by 1979 No. 65 r. 2

22. (1) The units of measurement of frequency are the units specified in Column 2 of Schedule 8.

(2) A unit of measurement specified in an item in Schedule 8 is related to the hertz as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 8 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 23.

The hertzSubstituted by 1979 No. 65 r. 2

23. The hertz is the frequency of a regularly recurrent phenomenon that repeats itself once each second.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 24.

Units of measurement of velocity and speed

Division 9-Velocity and speed

Substituted by 1979 No. 65 r. 2

24. (1) The units of measurement of velocity and speed are the units specified in Column 2 of Schedule 9.

(2) A unit of measurement specified in an item in Schedule 9 is related to the metre per second as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 9 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 25.

The metre per secondSubstituted by 1979 No. 65 r. 2

25. The metre per second is the mean velocity or the mean speed of a point that moves its position rectilinearly a distance of 1 metre in 1 second.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 26.

Units of measurement of acceleration

Division 10-Acceleration

Substituted by 1979 No. 65 r. 2

26. (1) The units of measurement of acceleration are the units specified in Column 2 of Schedule 10.

(2) A unit of measurement specified in an item in Schedule 10 is related to the metre per second squared as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 10 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 27.

The metre per second squaredSubstituted by 1979 No. 65 r. 2

27. The metre per second squared is the mean acceleration of a point that changes its velocity by 1 metre per second in 1 second. Division 11-Force

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 28.

Units of measurement of forceSubstituted by 1979 No. 65 r. 2

28. (1) The units of measurement of force are the units specified in Column 2 of Schedule 11.

(2) A unit of measurement specified in an item in Schedule 11 is related to the newton as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 11 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 29.

The newtonSubstituted by 1979 No. 65 r. 2

29. The newton is the force which when applied to a body having a mass of 1 kilogram causes an acceleration of 1 metre per second squared in the direction of application of the force.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 30.

Units of measurement of work and energy

Division 12-Work and energy

Substituted by 1979 No. 65 r. 2

30. (1) The units of measurement of work and energy are the units specified in Column 2 of Schedule 12.

(2) A unit of measurement specified in an item in Schedule 12 is related to the joule as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 12 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 31.

The jouleSubstituted by 1979 No. 65 r. 2

31. The joule is the work done or the energy expended when a force of 1 newton moves the point of application a distance of 1 metre in the direction of that force.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 32.

Units of measurement of power

Division 13-Power

Substituted by 1979 No. 65 r. 2

32. (1) The units of measurement of power are the units specified in Column 2 of Schedule 13.

(2) A unit of measurement specified in an item in Schedule 13 is related to the watt as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 13 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 33.

The wattSubstituted by 1979 No. 65 r. 2

33. The watt is the power used when work is done or energy is expended at the rate of 1 joule per second.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 34.

Units of measurement of pressure

Division 14-Pressure

Substituted by 1979 No. 65 r. 2

34. (1) The units of measurement of pressure are the units specified in Column 2 of Schedule 14.

(2) A unit of measurement specified in an item in Schedule 14 is related to the pascal as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 14 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 35.

The pascalSubstituted by 1979 No. 65 r. 2

35. The pascal is the pressure resulting from a force of 1 newton applied uniformly over an area of 1 square metre.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 36.

Units of measurement of viscosity and kinematic viscosity

Division 15-Viscosity and Kinematic viscosity

Substituted by 1979 No. 65 r. 2

36. (1) The units of measurement of viscosity and kinematic viscosity are the units specified in Column 2 of Schedule 15.

(2) A unit of measurement specified in an item in Schedule 15 is related to the pascal second or the square metre per second as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 15 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 37.

The pascal secondSubstituted by 1979 No. 65 r. 2

37. The pascal second is the viscosity of a fluid for which there is a tangential force of 1 newton on 1 square metre of either of 2 infinite parallel planes 1 metre apart when-

(a) the space between those planes is filled with the fluid;

(b) one of the planes moves with a velocity of 1 metre per second in its own plane relative to the other; and

(c) the movement of the fluid is laminar.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 38.

The square metre per secondSubstituted by 1979 No. 65 r. 2

38. The square metre per second is the kinematic viscosity of a fluid having a viscosity of 1 pascal second and a density of 1 kilogram per cubic metre.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 39.

Units of measurement of electric current

Division 16-Electric current

Substituted by 1979 No. 65 r. 2

39. (1) The units of measurement of electric current are the units specified in Column 2 of Schedule 16.

(2) A unit of measurement specified in an item in Schedule 16 is related to the ampere as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 16 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 40.

The ampereSubstituted by 1979 No. 65 r. 2

40. The ampere is the unvarying electric current that, when flowing in each of 2 parallel straight conductors of infinite length of negligible cross-section and separated by a distance of 1 metre from each other in free space, produces between those conductors a force equal to 0.2 x 10-6 newtons per metre length of conductor.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 41.

Units of measurement of electric charge

Division 17-Electric charge

Substituted by 1979 No. 65 r. 2

41. (1) The units of measurement of electric charge are the units specified in Column 2 of Schedule 17.

(2) A unit of measurement specified in an item in Schedule 17 is related to the coulomb as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 17 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 42.

The coulombSubstituted by 1979 No. 65 r. 2

42. The coulomb is the quantity of electric charge that is transferred each second by an electric current of 1 ampere.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 43.

Units of measurement of potential difference and electromotive force

Division 18-Potential difference and electromotive force

Substituted by 1979 No. 65 r. 2

43. (1) The units of measurement of potential difference and electromotive force are the units specified in Column 2 of Schedule 18.

(2) A unit of measurement specified in an item in Schedule 18 is related to the volt as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 18 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 44.

The voltSubstituted by 1979 No. 65 r. 2

44. The volt is the potential difference that exists between 2 points on a conductor carrying an unvarying electric current of 1 ampere when the power dissipated between those points is equal to 1 watt.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 45.

Units of measurement of electrical resistance

Division 19-Electrical resistance

Substituted by 1979 No. 65 r. 2

45. (1) The units of measurement of electrical resistance are the units specified in Column 2 of Schedule 19.

(2) A unit of measurement specified in an item in Schedule 19 is related to the ohm as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 19 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 46.

The ohmSubstituted by 1979 No. 65 r. 2

46. The ohm is the electrical resistance between 2 points on a conductor that does not contain any source of electromotive force when a constant potential difference of 1 volt maintained between those points results in a current of 1 ampere in the conductor.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 47.

Units of measurement of electrical conductance

Division 20-Electrical conductance

Substituted by 1979 No. 65 r. 2

47. (1) The units of measurement of electrical conductance are the units specified in Column 2 of Schedule 20.

(2) A unit of measurement specified in an item in Schedule 20 is related to the siemens as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 20 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 48.

The siemensSubstituted by 1979 No. 65 r. 2

48. The siemens is the electrical conductance of a conductor that has an electrical resistance of 1 ohm.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 49.

Units of measurement of electrical capacitance

Division 21-Electrical capacitance

Substituted by 1979 No. 65 r. 2

49. (1) The units of measurement of electrical capacitance are the units specified in Column 2 of Schedule 21.

(2) A unit of measurement specified in an item in Schedule 21 is related to the farad as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 21 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 50.

The faradSubstituted by 1979 No. 65 r. 2

50. The farad is the electrical capacitance that exists between 2 conductors when the transfer of an electric charge of 1 coulomb from one to the other changes the potential difference between them by 1 volt.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 51.

Units of measurement of electrical inductance

Division 22-Electrical inductance

Substituted by 1979 No. 65 r. 2

51. (1) The units of measurement of electrical inductance are the units specified in Column 2 of Schedule 22.

(2) A unit of measurement specified in an item in Schedule 22 is related to the henry as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 22 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 52.

The henrySubstituted by 1979 No. 65 r. 2

52. The henry is the electrical inductance of a closed circuit in which an electromotive force of 1 volt is produced when the electric current that traverses the circuit varies uniformly at the rate of 1 ampere per second.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 53.

Units of measurement of temperature

Division 23-Temperature

Substituted by 1979 No. 65 r. 2

53. (1) The units of measurement of temperature are the units specified in Column 2 of Schedule 23.

(2) A unit of measurement specified in an item in Schedule 23 is related to the kelvin as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 23 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 54.

The kelvin and the degree CelsiusSubstituted by 1979 No. 65 r. 2

54. (1) The kelvin is 1/273.16 of the thermodynamic temperature of the triple point of water.

(2) The degree Celsius is the unit of measurement of Celsius temperature and is equal in magnitude to the kelvin.

(3) The numerical value in degrees Celsius of a thermodynamic temperature is related to the numerical value of that temperature in kelvins in accordance with the equation t = T - 273.15, where-

t is the numerical value of that temperature in degrees Celsius;

and

T is the numerical value of that temperature in kelvins.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 55.

Units of measurement of luminous intensity

Division 24-Luminous intensity

Substituted by 1979 No. 65 r. 2

55. (1) The units of measurement of luminous intensity are the units specified in Column 2 of Schedule 24.

(2) A unit of measurement specified in an item in Schedule 24 is related to the candela as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 24 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 56.

The candelaSubstituted by 1979 No. 65 r. 2

56. The candela is the luminous intensity in the perpendicular direction of a surface of 1/600 000 square metre of a full radiator at the temperature of solidification of platinum under a pressure of 101 325 pascals.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 57.

Units of measurement of luminous flux

Division 25-Luminous flux

Substituted by 1979 No. 65 r. 2

57. (1) The units of measurement of luminous flux are the units specified in Column 2 of Schedule 25.

(2) A unit of measurement specified in an item in Schedule 25 is related to the lumen as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 25 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 58.

The lumenSubstituted by 1979 No. 65 r. 2

58. The lumen is the luminous flux emitted into a solid angle of 1 steradian by an isotropic point source having a luminous intensity of 1 candela.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 59.

Units of measurement of illuminance

Division 26-Illuminance

Substituted by 1979 No. 65 r. 2

59. (1) The units of measurement of illuminance are the units specified in Column 2 of Schedule 26.

(2) A unit of measurement specified in an item in Schedule 26 is related to the lux as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 26 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 60.

The luxSubstituted by 1979 No. 65 r. 2

60. The lux is the illuminance produced at the surface of a sphere having a radius of 1 metre by a point source that-

(a) is situated at its centre; and

(b) has a luminous intensity of 1 candela in all directions.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 61.

Units of measurement of luminance

Division 27-Luminance

Substituted by 1979 No. 65 r. 2

61. (1) The units of measurement of luminance are the units specified in Column 2 of Schedule 27.

(2) A unit of measurement specified in an item in Schedule 27 is related to the candela per square metre as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 27 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 62.

The candela per square metreSubstituted by 1979 No. 65 r. 2

62. The candela per square metre is the luminance of a surface that has a uniform luminous intensity of 1 candela per square metre of projected area.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 63.

Units of measurement of activity

Division 28-Activity (radionuclides)

Substituted by 1979 No. 65 r. 2

63. (1) The units of measurement of activity of a radionuclide are the units specified in Column 2 of Schedule 28.

(2) A unit of measurement specified in an item in Schedule 28 is related to the becquerel as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 28 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 64.

The becquerelSubstituted by 1979 No. 65 r. 2

64. The becquerel is the activity of a radionuclide that is undergoing 1 transformation per second.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 65.

Units of measurement of exposure

Division 29-Exposure (ionizing radiation)

Substituted by 1979 No. 65 r. 2

65. (1) The units of measurement of exposure to ionizing radiation are the units specified in Column 2 of Schedule 29.

(2) A unit of measurement specified in an item in Schedule 29 is related to the coulomb per kilogram as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 29 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 66.

The coulomb per kilogramSubsituted by 1979 No. 65 r. 2

66. The coulomb per kilogram is the exposure to ionizing radiation in respect of which the sum of the electric charges of all the ions of the same sign produced in air equals 1 coulomb per kilogram of the mass of a volume of air when all the negatrons and positrons liberated by the radiation in that volume of air are completely stopped in air.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 67.

Units of measurement of absorbed dose, absorbed dose index, kerma and

specific

energy imparted

Division 30-Absorbed dose, absorbed dose index, kerma and specific energy

imparted (ionizing radiation)

Substituted by 1979 No. 65 r. 2

67. (1) The units of measurement of absorbed dose, absorbed dose index, kerma and specific energy imparted are the units specified in Column 2 of Schedule 30.

(2) A unit of measurement specified in an item in Schedule 30 is related to the gray as specified in Column 3 of that Schedule in that item.

(3) A unit of measurement specified in an item in Schedule 30 may be referred to by the symbol specified in Column 4 of that Schedule in that item.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 68.

The graySubstituted by 1979 No. 65 r. 2

68. The gray is the absorbed dose, absorbed dose index, kerma or specific energy imparted when 1 joule is imparted to 1 kilogram of irradiated matter.

Regulations 69-76 repealed by 1979 No. 65 r. 2

* * * * * * * *

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 77.

Verifying authorities

PART III-STANDARDS OF MEASUREMENT

77. (1) The Commission may, by instrument in writing, appoint a person (including a body corporate) to be a verifying authority in relation to the verification and reverification of standards of measurement as subsidiary standards of measurement.

(2) An appointment under this regulation may be an appointment of the person for the time being holding, or performing the duties of, a specified office of-

(a) the Commonwealth or a State or Territory of the Commonwealth; or

(b) a body corporate.

(3) An appointment under this regulation may be in relation to the verification and reverification of standards of measurement generally or the verification and reverification of the standards of measurement included in a particular class or particular classes of standards of measurement.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 78.

Marks to be stamped on or affixed to standards of measurementSubstituted by 1965 No. 13 r. 18

78. (1) Subject to this regulation, a standard of measurement shall not be verified or reverified under these Regulations unless-

(a) a distinguishing mark has been stamped or otherwise legibly and permanently affixed on or to it before it is verified or reverified; or (b) there is stamped or otherwise legibly marked on or affixed to it, immediately after it has been verified or reverified, a mark indicating the date on which it was verified or reverified and, if such is the case, that it is to be deemed to be of a value equal to its denomination in accordance with regulation 82 of these Regulations.

(2) The last preceding sub-regulation does not apply in relation to a standard of measurement if it is impracticable, by reason of its size or nature, so to stamp or affix a mark referred to in paragraph (a) or (b) of the last preceding sub-regulation on or to it.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 78A.

Verification, &c., of standards of measurement referred to in section 8 of

the

ActInserted by 1965 No. 13 r. 18

78A. (1) Where a standard of measurement referred to in section 8 of the Act is verified or reverified-

(a) in the case of a verification or reverification carried out by the Organization-an officer or employee of the Organization authorized by the Organization in writing to sign and issue certificates under this regulation; or (b) in any other case-any person authorized by the Organization in writing to sign and issue certificates under this regulation,

may sign and issue such a certificate with respect to the verification or reverification of the standard of measurement.

(2) There shall be stated in every such certificate-

(a) the date on which the standard of measurement was verified or reverified;

(b) the accuracy with which the standard was verified or reverified;

(c) a description of the mark (if any) appearing on the standard as referred to in the last preceding regulation;

(d) the value, in terms of a Commonwealth legal unit of measurement or Commonwealth legal units of measurement, of the standard as ascertained on the date referred to in paragraph (a) of this sub-regulation; and

(e) that the standard is a Commonwealth standard of measurement or a working standard of measurement, as the case may be.

Substituted by 1968 No. 150 r.6

(3) For the purposes of paragraph (b) of the last preceding sub-regulation, the accuracy of the standard of measurement shall be ascertained and expressed in a manner authorized by a determination of the Organization for the purposes of this regulation or, if more than one manner is authorized in such a determination, in one of the manners so authorized.

(4) This regulation does not apply to a special standard of measurement referred to in sub-section (2A) of section 8 of the Act.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 79.

Verification, &c., of standards of measurement to which section 9 of the Act

appliesSubstituted by 1965 No. 13 r. 18

79. (1) Where a standard of measurement to which section 9 of the Act applies is verified or reverified in accordance with that section-

(a) in the case of a verification or reverification carried out by the Organization-an officer or employee of the Organization authorized by the Organization in writing to sign and issue certificates under this regulation; or

(b) in any other case-any person authorized by the Organization in writing to sign and issue certificates under this regulation,

may sign and issue such a certificate with respect to the verification or reverification of the standard of measurement.

(2) There shall be stated in every such certificate-

(a) the date on which the standard of measurement was verified or reverified;

(b) the accuracy with which the standard was verified or reverified;

(c) a description of the mark (if any) appearing on the standard as referred to in regulation 78 of these Regulations;

(d) the value, in terms of a Commonwealth legal unit of measurement or Commonwealth legal units of measurement, of the standard as ascertained on the date referred to in paragraph (a) of this sub-regulation;

(e) the period specified under sub-section (3) of section 9 of the Act as the period within which the standard is to be reverified or reverified again; and

(f) that the standard was verified or reverified in accordance with section 9 of the Act.

Substituted by 1968 No. 150 r. 7

(3) For the purposes of paragraph (b) of the last preceding sub-regulation, the accuracy of the standard of measurement shall be ascertained and expressed in a manner authorized by a determination of the Organization for the purposes of this regulation or, if more than one manner is authorized in such a determination, in one of the manners so authorized.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 80.

Verification, &c., of standards of measurement as subsidiary standards

80. (1) The verification and reverification of a standard of measurement as a subsidiary standard of measurement for the purposes of the Act shall be carried out-

(a) by the Organization; (b) by a verifying authority being a body corporate; or

(c) by, or under the supervision of, a verifying authority not being a body corporate,

in accordance with this regulation.

Amended by 1965 No. 13 r. 19

(2) The verification or reverification shall be carried out in a manner that, having regard to the nature of the standard to be verified or reverified, is appropriate for the purpose.

Amended by 1968 No. 150 r. 8

(3) Where a standard of measurement is verified or reverified as a subsidiary standard of measurement by the Organization, the Organization or an officer or employee of the Organization authorized by the Organization in writing for the purposes of this sub-regulation shall specify the period within which the standard is to be reverified or reverified again, as the case requires, and the standard shall be reverified within that period.

Amended by 1968 No. 150 r. 8

(4) Where a standard of measurement is verified or reverified as a subsidiary standard of measurement by, or under the supervision of, a verifying authority, the standard shall be reverified, or reverified again, as the case requires, within such period as the Commission or a person authorized by the Commission in writing for the purposes of this sub-regulation directs.

Amended by 1968 No. 150 r. 8

(5) A direction by the Commission or a person authorized by the Commission, under the last preceding sub-regulation may relate to a particular standard of measurement or to all the standards of measurement included in a particular class of standards of measurement.

Amended by 1965 No. 13 r. 19; 1968 No. 150 r. 8

(6) Where a standard of measurement is verified or reverified in accordance with this regulation-

(a) if the verification or reverification is carried out by the Organization or a verifying authority being a body corporate-an officer or employee of the Organization or of the verifying authority authorized in writing by the Organization or the verifying authority, as the case may be, to sign and issue certificates under this regulation; and

(b) if the verification or reverification is carried out by, or under the supervision of, a verifying authority not being a body corporate-

(i) the verifying authority; or

(ii) if the Commission empowers the verifying authority to authorize in writing a person or persons to sign and issue certificates under this regulation, a person so authorized,

may sign and issue a certificate under this regulation.

Substituted by 1965 No. 13 r. 19; amended by 1968 No. 150 r. 8

(7) There shall be stated in every such certificate- (a) the date on which the standard of measurement was verified or reverified;

(b) the accuracy with which the standard was verified or reverified;

(c) a description of the mark (if any) appearing on the standard as referred to in regulation 78 of these Regulations;

(d) the value, in terms of a Commonwealth legal unit of measurement or Commonwealth legal units of of measurement, of the standard as ascertained on the date referred to in paragraph (a) of this sub-regulation;

* * * * * * * *

(f) the period within which the standard is to be reverified or reverified again; and

(g) that the standard was verified or reverified as a subsidiary standard of measurement-

(i) by the Organization; or

(ii) by, or under the supervision of, a specified verifying authority,

in accordance with these Regulations.

Substituted by 1968 No. 150 r. 8

(8) For the purposes of paragraph (b) of the last preceding sub-regulation, the accuracy of the standard of measurement shall be ascertained and expressed in a manner authorized by a determination of the Commission for the purposes of this regulation or, if more than one manner is authorized in such a determination, in one of the manners so authorized.

Substituted by 1965 No. 13 r. 19; amended by 1968 No. 150 r. 8

(9) For the purposes of the last preceding sub-regulation, the Commission may, from time to time, determine the manner or manners in which the accuracy of a subsidiary standard of measurement shall be ascertained and expressed.

Added by 1965 No. 13 r. 19; amended by 1968 No. 150 r. 8

(10) Notice of a determination made under sub-regulation (8) of this regulation shall be given, by or on behalf of the Commission, to all verifying authorities that have been appointed verifying authorities in relation to a standard of measurement to which the determination relates.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 80A.

Certificates as evidenceInserted by 1965 No. 13 r. 20

80A. (1) A certificate issued under this Part is evidence of the matters stated in it.

(2) A document purporting to be such a certificate may be received in evidence in any court (whether exercising federal jurisdiction or not) or in proceedings before a person authorized by a law of a State or Territory of the Commonwealth, or by consent of parties, to hear, receive and examine evidence.

Added by 1968 No. 150 r. 9

(3) A certificate purporting to be a certificate under this Part or a document purporting to be a document cancelling a certificate under this Part shall, unless the contrary is proved, be deemed to have been signed and issued by the person by whom it purports to have been signed and issued and, unless the contrary is proved, the person by whom it purports to have been signed and issued shall be deemed to be a person authorized by, or in pursuance of, this Part to sign and issue the certificate or document.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 81.

Cancelling of certificatesSubstituted by 1968 No. 150 r. 10

81. (1) A certificate issued under regulation 78A or regulation 79 of these Regulations may be cancelled at any time by the Organization or by a person authorized in writing to do so by the Organization.

(2) A certificate issued under regulation 80 of these Regulations may be cancelled at any time-

(a) in the case of a certificate issued by an officer or employee of the Organization-by the Organization or by a person authorized in writing to do so by the Organization; or

(b) in the case of a certificate issued by a verifying authority, an officer or employee of a verifying authority or a person empowered by a verifying authority under paragraph (b) of sub-regulation (6) of regulation 80 of these Regulations to sign and issue certificates-

(i) by the Commission;

(ii) by the verifying authority; or

(iii) by a person authorized in writing by the Commission to cancel a certificate of such a kind.

(3) Where a certificate is cancelled in pursuance of this regulation, the body or person cancelling the certificate shall sign and issue a document stating that the certificate has been cancelled or, if the certificate is in the possession of the body or person, endorse on it the word "Cancelled" and the date of cancellation.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 82.

Permissible variations in certain subsidiary standards of

measurement-ScheduleSubstituted by 1968 No. 150 r. 10 Sub-reg. (1) amended by 1979 No. 65 r. 3

31

82. (1) A subsidiary standard of measurement of a denomination referred to in the first column of Schedule 31 that on verification or reverification is found not to be greater or less than its denomination by an amount exceeding the amount of permissible variation specified in the second column of that Schedule opposite to the reference to its denomination in the first column shall be deemed to be of a value equal to its denomination unless the certificate issued under regulation 80 of these Regulations in respect of that verification or reverification states otherwise.

(2) A subsidiary standard of measurement referred to in the last preceding sub-regulation shall not be deemed, in pursuance of that sub-regulation, to be of a value equal to its denomination unless the variation of the subsidiary standard of measurement from its denomination is determined to an accuracy that is equal to, or better than, one-third of the permissible variation relevant to that standard of measurement.

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SECT. 83.

Permissible variations in certain subsidiary standards of

measurement-ScheduleInserted by 1968 No. 150, r. 10 Sub-reg. (1) amended by 1979 No. 65, r. 4

32

83. (1) A subsidiary standard of measurement of a denomination referred to in the first column of Schedule 32 that on verification or reverification is found not to be greater or less than its denomination by an amount exceeding the amount of permissible variation specified in the second column of that Schedule opposite to the reference to its denomination in the first column shall be deemed to be of a value equal to its denomination unless the certificate issued under regulation 80 of these Regulations in respect of that verification or reverification states otherwise.

Amended by 1979 No. 65 r. 4

(2) A subsidiary standard of measurement referred to in the last preceding sub-regulation shall not be deemed, in pursuance of that sub-regulation, to be of a value equal to its denomination unless the variation of the subsidiary standard of measurement from its denomination is determined to an accuracy that is equal to, or better than, one-third of the permissible variation relevant to that standard of measurement provided that the variation is so determined to an accuracy that is not better than that set out in the third column of Schedule 32 opposite to the reference to the denomination of that standard of measurement in the first column of that Schedule.

-----------

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 1

## SCH

Substituted by 1979 No. 65 r. 5

## SCH

SCHEDULE 1*2*

Regulation 4

UNITS OF MEASUREMENT OF LENGTH

------------------------------------------------------------------------------ --

Column 1 Column 2 Column 3 Column 4

Length in

Item Name of unit metres Symbol ------------------------------------------------------------------------------ -- 1 nautical mile . . . . . . . 1852 n mile 2 kilometre . . . . . . . . . 10*3* km 3 hectometre . . . . . . . . . 10*2* hm 4 dekametre . . . . . . . . . 10 dam 5 metre . . . . . . . . . . . 1 m 6 decimetre . . . . . . . . . 10*-1* dm 7 centimetre . . . . . . . . . 10*-2* cm 8 millimetre . . . . . . . . . 10*-3* mm 9 micrometre or micron . . . . 10*-6* um 10 nanometre . . . . . . . . . 10*-9* nm 11 mile . . . . . . . . . . . . 1609.344 . . 12 chain . . . . . . . . . . . 22 (0.9144) ch 13 yard . . . . . . . . . . . . 0.9144 yd 14 foot . . . . . . . . . . . . 1/3 (0.9144) ft or ' 15 link . . . . . . . . . . . . 22/100 (0.9144) lk 16 inch . . . . . . . . . . . . 1/36 (0.9144) in or " ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

*2* The Schedules-As originally made, these Regulations contained 23 Schedules. The Twenty-fourth to the Thirtieth Schedules were added from 1965 to 1967. By Statutory Rules 1979 No. 60, the First to the Twenty-third Schedules (inclusive) were substituted by Schedules 1 to 23, and Schedules 24 to 30 were added (regulation 5). The Twenty-fourth and Twenty-fifth Schedules were amended and re-numbered Schedules 31 and 32 respectively (regulations 6 and 7), and the Twenty-sixth to the Thirtieth Schedules (inclusive) were repealed (regulation 8).

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 2

## SCH

SCHEDULE 2

Regulation 6

UNITS OF MEASUREMENT OF AREA

------------------------------------------------------------------------------ --

Column 1 Column 2 Column 3 Column 4

Area in

Item Name of unit square metres Symbol ------------------------------------------------------------------------------ -- 1 square kilometre . . . . . . 10*8* km*2* 2 hectare . . . . . . . . . . 10*4* ha 3 square metre . . . . . . . . 1 m*2* 4 square decimetre . . . . . . 10*-2* dm*2* 5 square centimetre . . . . . 10*-4* cm*2* 6 square millimetre . . . . . 10*-6* mm*2* 7 square yard . . . . . . . . (0.9144)*2* sq yd or

yd*2* 8 square foot . . . . . . . . 1/9 (0.9144)*2* sq ft or

ft*2* 9 square inch . . . . . . . . 1/1296 (0.9144)*2* sq in or

in*2* 10 acre . . . . . . . . . . . . 4 840 (0.9144)*2* ac 11 rood . . . . . . . . . . . . 1 210 (0.9144)*2* rd 12 perch . . . . . . . . . . . 30.25 (0.9144)*2* p ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 3

## SCH

SCHEDULE 3

Regulation 8

UNITS OF MEASUREMENT OF MASS

------------------------------------------------------------------------------ --

Column 1 Column 2 Column 3 Column 4

Mass in

Item Name of unit kilograms Symbol ------------------------------------------------------------------------------ -- 1 megatonne . . . . . . . . . 10*9* Mt 2 kilotonne . . . . . . . . . 10*6* kt 3 tonne . . . . . . . . . . . 10*3* t 4 megagram . . . . . . . . . . 10*3* Mg 5 kilogram . . . . . . . . . . 1 kg 6 hectogram . . . . . . . . . 10*-1* . . 7 dekagram . . . . . . . . . . 10*-2* . . 8 gram . . . . . . . . . . . . 10*-3* g 9 decigram . . . . . . . . . . 10*-4* dg 10 centigram . . . . . . . . . 10*-5* cg 11 milligram . . . . . . . . . 10*-6* mg 12 microgram . . . . . . . . . 10*-9* lg 13 ton . . . . . . . . . . . . 2 240 (0.453 592 37) . . 14 short ton . . . . . . . . . 2 000 (0.453 592 37) sh tn 15 hundredweight . . . . . . . 112 (0.453 592 37) cwt 16 quarter . . . . . . . . . . 28 (0.453 592 37) qr 17 stone . . . . . . . . . . . 14 (0.453 592 37) . . 18 pound . . . . . . . . . . . 1 (0.453 592 37) lb 19 ounce . . . . . . . . . . . 1/16 (0.453 592 37) oz 20 dram . . . . . . . . . . . . 1/256 (0.453 592 37) dr 21 grain . . . . . . . . . . . 1/7000 (0.453 592 37) gr 22 metric carat . . . . . . . . 0.2 x 10*-3* CM 23 slug . . . . . . . . . . . . 32.174 (0.453 592 37) . . 24 troy ounce . . . . . . . . . 480/7000 (0.453 592 37) oz tr 25 pennyweight . . . . . . . . 24/7000 (0.453 592 37) dwt ------------------------------------------------------------------------------ -- -----------

-----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 4

## SCH

SCHEDULE 4

Regulation 10

UNITS OF MEASUREMENT OF VOLUME

------------------------------------------------------------------------------ --

Column 1 Column 2 Column 3 Column 4

Volume in

Item Name of unit cubic metres Symbol ------------------------------------------------------------------------------ -- 1 cubic kilometre . . . . . . 109 km*3* 2 teralitre . . . . . . . . . 109 TL or Tl 3 gigalitre . . . . . . . . . 106 GL or Gl 4 megalitre . . . . . . . . . 103 ML or Ml 5 cubic metre . . . . . . . . 1 *3* 6 kilolitre . . . . . . . . . 1 kL or kl 7 hectolitre . . . . . . . . . 10*-1* hL or hl 8 dekalitre . . . . . . . . . 10*-2* daL or dal 9 cubic decimetre . . . . . . 10*-3* dm*3* 10 litre . . . . . . . . . . . 10*-3* L or l 11 decilitre . . . . . . . . . 10*-4* dL or dl 12 centilitre . . . . . . . . . 10*-5* cL or cl 13 cubic centimetre . . . . . . 10*-6* cm*3* 14 millilitre . . . . . . . . . 10*-6* mL or ml 15 microlitre . . . . . . . . . 10*-9* uL or ul 16 cubic millimetre . . . . . . 10*-9* mm*3* 17 cubic yard . . . . . . . . . (0.9144)*3* cu yd or yd*3* 18 cubic foot . . . . . . . . . 1/27 (0.9144)*3* cu ft or ft*3* 19 cubic inch . . . . . . . . . 1/46656 (0.9144)*3* cu in or in*3* 20 gallon . . . . . . . . . . . 1 x 4.546 09 x 10*-3* gal 21 quart . . . . . . . . . . . 1/4 x 4.546 09 x 10*-3* qt 22 pint . . . . . . . . . . . . 1/8 x 4.546 09 x 10*-3* pt 23 gill . . . . . . . . . . . . 1/32 x 4.546 09 x

10*-3* . . 24 fluid ounce . . . . . . . . 1/160 x 4.546 09 x

10*-3* fl oz 25 fluid drachm . . . . . . . . 1/1280 x 4.546 09 x

10*-3* fl dr 26 minim . . . . . . . . . . . 1/76800 x 4.546 09 x

10*-3* min ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 5

## SCH

SCHEDULE 5

Regulation 12

UNITS OF MEASUREMENT OF DENSITY

------------------------------------------------------------------------------ --

Column 1 Column 2 Column 3 Column 4

Density in

kilograms per

Item Name of unit cubic metre Symbol ------------------------------------------------------------------------------ -- 1 gram per cubic centimetre . 103 g/cm3 2 tonne per cubic metre . . . 103 t/m3 3 kilogram per cubic metre . . 1 kg/m3 4 kilogram per hectolitre . . 10 kg/hL or kg/hl 5 kilogram per litre . . . . . 103 kg/L or kg/l 6 gram per milliltre . . . . . 103 g/mL or g/ml ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 6

## SCH

SCHEDULE 6

Regulation 14

UNITS OF MEASUREMENT OF PLANE ANGLE

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Item Name of unit Angle in radians Symbol ------------------------------------------------------------------------------ -- 1 radian . . . . . . . . . . . 1 rad 2 milliradian . . . . . . . . 10*-3* mrad 3 microradian . . . . . . . . 10*-3* urad 4 degree . . . . . . . . . . . #/180 degrees

5 minute . . . . . . . . . . . 1/60 x #/180 '

6 second . . . . . . . . . . . 1/3600 x #/180 "

------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 7

## SCH

SCHEDULE 7

Regulation 20

UNITS OF MEASUREMENT OF TIME INTERVAL

------------------------------------------------------------------------------ --

Column 1 Column 2 Column 3 Column 4

Time interval in

Item Name of unit seconds Symbol ------------------------------------------------------------------------------ -- 1 day . . . . . . . . . . . . 86 400 d 2 hour . . . . . . . . . . . . 3 600 h 3 minute . . . . . . . . . . . 60 min 4 second . . . . . . . . . . . 1 s 5 millisecond . . . . . . . . 10*-3* ms 6 microsecond . . . . . . . . 10*-6* us 7 nanosecond . . . . . . . . . 10*-9* ns ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 8

## SCH

SCHEDULE 8

Regulation 22

UNITS OF MEASUREMENT OF FREQUENCY

------------------------------------------------------------------------------ --

Column 1 Column 2 Column 3 Column 4

Item Name of unit Frequency in hertz Symbol ------------------------------------------------------------------------------ -- 1 megahertz . . . . . . . . . 106 MHz 2 kilohertz . . . . . . . . . 103 kHz 3 hertz . . . . . . . . . . . 1 Hz 4 revolution per minute . . . 1/60 r/min 5 revolution per second . . . 1 r/s ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 9

## SCH

SCHEDULE 9

Regulation 24

UNITS OF MEASUREMENT OF VELOCITY AND SPEED

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Velocity or

speed in

Item Name of unit metres per second Symbol ------------------------------------------------------------------------------ -- 1 metre per second . . . . . . 1 m/s 2 knot . . . . . . . . . . . . 463/900 kn 3 kilometre per hour . . . . . 5/18 km/h 4 centimetre per second . . . 10*-2* cm/s 5 millimetre per second . . . 10*-3* mm/s 1609.344

6 mile per hour . . . . . . . ------- mile/h or mph 60 x 60

0.3048

7 foot per minute . . . . . . ----- ft/min 60

------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 10

## SCH

SCHEDULE 10

Regulation 26

UNITS OF MEASUREMENT OF ACCELERATION

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Acceleration in

metres per

Item Name of unit second squared Symbol ------------------------------------------------------------------------------ -- 1 metre per second squared . . 1 m/s2 2 centimetre per second

squared . . . . . . . . . . 10*-2* cm/s2 3 millimetre per second

squared . . . . . . . . . . 10*-3* mm/s2 4 micrometre per second

squared . . . . . . . . . . 10*-6* um/s2 ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 11

## SCH

SCHEDULE 11

Regulation 28

UNITS OF MEASUREMENT OF FORCE

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Item Name of unit Force in newtons Symbol ------------------------------------------------------------------------------ -- 1 meganewton . . . . . . . . . 106 MN 2 kilonewton . . . . . . . . . 103 kN 3 newton . . . . . . . . . . . 1 N 4 millinewton . . . . . . . . 10*-3* mN ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 12

## SCH

SCHEDULE 12

Regulation 30

UNITS OF MEASUREMENT OF WORK AND ENERGY

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Work or

Item Name of unit energy in joules Symbol ------------------------------------------------------------------------------ -- 1 exajoule . . . . . . . . . . 1018 EJ 2 petajoule . . . . . . . . . 1015 PJ 3 terajoule . . . . . . . . . 1012 TJ 4 gigajoule . . . . . . . . . 109 GJ 5 megajoule . . . . . . . . . 106 MJ 6 kilojoule . . . . . . . . . 103 kJ 7 joule . . . . . . . . . . . 1 J 8 gigawatt hour . . . . . . . 3.6 x 1012 GW.h 9 megawatt hour . . . . . . . 3.6 x 109 MW.h 10 kilowatt hour . . . . . . . 3.6 x 106 kW.h 11 watt hour . . . . . . . . . 3.6 x 103 W.h 12 kilocalorie . . . . . . . . 4.1868 x 103 kcal 13 calorie . . . . . . . . . . 4.1868 cal 14 British thermal unit . . . . 1 055.056 Btu 15 gigaelectronvolt . . . . . . 1.602 189 2 x 10*-10* GeV 16 megaelectronvolt . . . . . . 1.602 189 2 x 10*-13* MeV 17 kiloelectronvolt . . . . . . 1.602 189 2 x 10*-16* keV 18 electronvolt . . . . . . . . 1.602 189 2 x 10*-19* eV ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 13

## SCH

SCHEDULE 13

Regulation 32

UNITS OF MEASUREMENT OF POWER

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Item Name of unit Power in watts Symbol ------------------------------------------------------------------------------ -- 1 gigawatt . . . . . . . . . . 109 GW 2 megawatt . . . . . . . . . . 106 MW 3 kilowatt . . . . . . . . . . 103 kW 4 watt . . . . . . . . . . . . 1 W 5 milliwatt . . . . . . . . . 10*-3* mW 6 microwatt . . . . . . . . . 10*-6* uW 7 horsepower . . . . . . . . . 745.7 hp ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 14

## SCH

SCHEDULE 14

Regulation 34

UNITS OF MEASUREMENT OF PRESSURE

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Item Name of unit Pressure in pascals Symbol ------------------------------------------------------------------------------ -- 1 gigapascal . . . . . . . . . 109 GPa 2 megapascal . . . . . . . . . 106 MPa 3 kilopascal . . . . . . . . . 103 kPa 4 pascal . . . . . . . . . . . 1 Pa 5 millibar . . . . . . . . . . 100 mb or mbar 6 millimetre of mercury . . . 133.322 19 mmHg ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 15

## SCH

SCHEDULE 15

Regulation 36

UNITS OF MEASUREMENT OF VISCOSITY AND KINEMATIC VISCOSITY

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Viscosity in

pascal seconds or

kinematic viscosity in

square metres per

Item Name of unit second Symbol ------------------------------------------------------------------------------ -- viscosity pascal seconds

1 pascal second . . . . . . . 1 Pa.s 2 millipascal second . . . . . 10*-3* mPa.s 3 poise . . . . . . . . . . . 10*-1* P 4 centipoise . . . . . . . . . 10*-3* cP

kinematic viscosity square metres per second

5 square metre per second . . 1 m2/s 6 square millimetre per second 10*-6* mm2/s 7 stokes . . . . . . . . . . . 10*-4* St 8 centistokes . . . . . . . . 10*-6* cSt ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 16

## SCH

SCHEDULE 16

Regulation 39

UNITS OF MEASUREMENT OF ELECTRIC CURRENT

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Electric current in

Item Name of unit amperes Symbol ------------------------------------------------------------------------------ -- 1 kiloampere . . . . . . . . . 103 kA 2 ampere . . . . . . . . . . . 1 A 3 milliampere . . . . . . . . 10*-3* mA 4 microampere . . . . . . . . 10*-6* uA ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 17

## SCH

SCHEDULE 17

Regulation 41

UNITS OF MEASUREMENT OF ELECTRICAL CHARGE

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Electric charge in

Item Name of unit coulombs Symbol ------------------------------------------------------------------------------ -- 1 coulomb . . . . . . . . . . 1 C 2 ampere hour . . . . . . . . 3600 A.h ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 18

## SCH

SCHEDULE 18

Regulation 43

UNITS OF MEASUREMENT OF POTENTIAL DIFFERENCE AND ELECTROMOTIVE FORCE

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Potential difference or

Item Name of unit electromotive force in

volts Symbol ------------------------------------------------------------------------------ -- 1 gigavolt . . . . . . . . . . 109 GV 2 megavolt . . . . . . . . . . 106 MV 3 kilovolt . . . . . . . . . . 103 kV 4 volt . . . . . . . . . . . . 1 V 5 millivolt . . . . . . . . . 10*-3* mV 6 microvolt . . . . . . . . . 10*-6* uV ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 19

## SCH

SCHEDULE 19

Regulation 45

UNITS OF MEASUREMENT OF ELECTRICAL RESISTANCE

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Electrical resistance in

Item Name of unit ohms Symbol ------------------------------------------------------------------------------ -- 1 gigohm . . . . . . . . . . . 109 G

2 megohm . . . . . . . . . . . 106 M

3 kilohm . . . . . . . . . . . 103 k

4 ohm . . . . . . . . . . . . 1

5 microhm . . . . . . . . . . 10*-6* u

------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 20

## SCH

SCHEDULE 20

Regulation 47

UNITS OF MEASUREMENT OF ELECTRICAL CONDUCTANCE

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Electrical conductance in

Item Name of unit siemens Symbol ------------------------------------------------------------------------------ -- 1 siemens . . . . . . . . . . 1 S 2 millisiemens . . . . . . . . 10*-3* mS 3 microsiemens . . . . . . . . 10*-6* uS ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 21

## SCH

SCHEDULE 21

Regulation 49

UNITS OF MEASUREMENT OF ELECTRICAL CAPACITANCE

------------------------------------------------------------------------------ --

Column 1 Column 2 Column 3 Column 4

Electrical capacitance in

Item Name of unit farads Symbol ------------------------------------------------------------------------------ -- 1 farad . . . . . . . . . . . 1 F 2 microfarad . . . . . . . . . 10*-6* uF 3 nanofarad . . . . . . . . . 10*-9* nF 4 picofarad . . . . . . . . . 10*-12* pF ------------------------------------------------------------------------------ -- -----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 22

## SCH

SCHEDULE 22

Regulation 51

UNITS OF MEASUREMENT OF ELECTRICAL INDUCTANCE

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Electrical inductance in

Item Name of unit henrys Symbol ------------------------------------------------------------------------------ -- 1 henry . . . . . . . . . . . 1 H 2 millihenry . . . . . . . . . 10*-3* mH 3 microhenry . . . . . . . . . 10*-6* uH ------------------------------------------------------------------------------ --

-----------

Substituted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 23

## SCH

SCHEDULE 23

Regulation 53

UNITS OF MEASUREMENT OF TEMPERATURE

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Temperature interval

Item Name of unit in kelvins Symbol ------------------------------------------------------------------------------ -- 1 kelvin . . . . . . . . . . . 1 K 2 millikelvin . . . . . . . . 0.001 mK 3 degree Celsius . . . . . . . l degreesC ------------------------------------------------------------------------------ --

-----------

Inserted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 24

## SCH

SCHEDULE 24

Regulation 55

UNITS OF MEASUREMENT OF LUMINOUS INTENSITY

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Luminous intensity

Item Name of unit in candelas Symbol ------------------------------------------------------------------------------ -- 1 megacandela . . . . . . . . 10*6* Mcd 2 kilocandela . . . . . . . . 10*3* kcd 3 candela . . . . . . . . . . 1 cd 4 millicandela . . . . . . . . 10*-3* mcd 5 microcandela . . . . . . . . 10*-6* ucd ------------------------------------------------------------------------------ -- -----------

Inserted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 25

## SCH

SCHEDULE 25

Regulation 57

UNITS OF MEASUREMENT OF LUMINOUS FLUX

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Luminous flux in

Item Name of unit lumens Symbol ------------------------------------------------------------------------------ -- 1 megalumen . . . . . . . . . 106 Mlm 2 kilolumen . . . . . . . . . 103 klm 3 lumen . . . . . . . . . . . 1 lm 4 millilumen . . . . . . . . . 10*-3* mlm 5 microlumen . . . . . . . . . 10*-6* ulm ------------------------------------------------------------------------------ --

-----------

Inserted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 26

## SCH

SCHEDULE 26

Regulation 59

UNITS OF MEASUREMENT OF ILLUMINANCE

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Illuminance

in

Item Name of unit lux Symbol ------------------------------------------------------------------------------ -- 1 megalux . . . . . . . . . . 106 Mlx 2 kilolux . . . . . . . . . . 103 klx 3 lux . . . . . . . . . . . . 1 lx 4 millilux . . . . . . . . . . 10*-3* mlx 5 microlux . . . . . . . . . . 10*-6* ulx ------------------------------------------------------------------------------ --

-----------

Inserted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 27

## SCH

SCHEDULE 27

Regulation 61

UNITS OF MEASUREMENT OF LUMINANCE

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4

Luminance in

candelas per

Item Name of unit square metre Symbol ------------------------------------------------------------------------------ -- 1 megacandela per square metre 106 Mcd/m*2* 2 kilocandela per square metre 103 kcd/m*2* 3 candela per square metre . . 1 cd/m*2* 4 millicandela per square

metre . . . . . . . . . . . 10*-3* mcd/m*2* 5 microcandela per square

metre . . . . . . . . . . . 10*-6* ucd/m*2* ------------------------------------------------------------------------------ --

-----------

Inserted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 28

## SCH

SCHEDULE 28

Regulation 63

UNITS OF MEASUREMENT OF ACTIVITY (RADIONUCLIDES)

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4 Activity in

Item Name of unit becquerels Symbol ------------------------------------------------------------------------------ -- 1 petabecquerel . . . . . . . 1015 PBq 2 terabecquerel . . . . . . . 1012 TBq 3 gigabecquerel . . . . . . . 109 GBq 4 megabecquerel . . . . . . . 106 MBq 5 kilobecquerel . . . . . . . 103 kBq 6 becquerel . . . . . . . . . 1 Bq 7 millibecquerel . . . . . . . 10*-3* mBq 8 microbecquerel . . . . . . . 10*-6* lBq 9 megacurie . . . . . . . . . 3.7 x 1016 MCi 10 kilocurie . . . . . . . . . 3.7 x 1013 kCi 11 curie . . . . . . . . . . . 3.7 x 1010 Ci 12 millicurie . . . . . . . . . 3.7 x 107 mCi 13 microcurie . . . . . . . . . 3.7 x 104 lCi 14 nanocurie . . . . . . . . . 3.7 x 10 nCi 15 picocurie . . . . . . . . . 3.7 x 10*-2* pCi 16 femtocurie . . . . . . . . . 3.7 x 10*-5* fCi ------------------------------------------------------------------------------ -- -----------

Inserted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 29

## SCH

SCHEDULE 29

Regulation 65

UNITS OF MEASUREMENT OF EXPOSURE (IONIZING RADIATION)

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4 Exposure in

coulombs per

Item Name of unit kilogram Symbol ------------------------------------------------------------------------------ -- 1 kilocoulomb per kilogram . . 103 kC/kg 2 coulomb per kilogram . . . . 1 C/kg 3 millicoulomb per kilogram . 10*-3* mC/kg 4 microcoulomb per kilogram . 10*-6* lC/kg 5 nanocoulomb per kilogram . . 10*-9* nC/kg 6 megaroentgen . . . . . . . . 0.258 x 103 MR 7 kiloroentgen . . . . . . . . 0.258 kR 8 roentgen . . . . . . . . . . 0.258 x 10*-3* R 9 milliroentgen . . . . . . . 0.258 x 10*-6* mR 10 microroentgen . . . . . . . 0.258 x 10*-9* lR ------------------------------------------------------------------------------ -- -----------

Inserted by 1979 No. 65 r. 5

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 30

## SCH

SCHEDULE 30

Regulation 67

UNITS OF MEASUREMENT OF ABSORBED DOSE, ABSORBED DOSE INDEX, KERMA AND

SPECIFIC ENERGY IMPARTED (IONIZING RADIATION)

------------------------------------------------------------------------------ -- Column 1 Column 2 Column 3 Column 4 Absorbed dose,

absorbed dose index,

kerma or specific

energy imparted in

Item Name of unit grays Symbol ------------------------------------------------------------------------------ -- 1 megagray . . . . . . . . . . 10*6* MGy 2 kilogray . . . . . . . . . . 10*3* kGy 3 gray . . . . . . . . . . . . 1 Gy 4 milligray . . . . . . . . . 10*-3* mGy 5 microgray . . . . . . . . . 10*-6* lGy 6 nanogray . . . . . . . . . . 10*-9* nGy 7 picogray . . . . . . . . . . 10*-12* pGy 8 gigarad . . . . . . . . . . 10*7* Grad 9 megarad . . . . . . . . . . 10*4* Mrad 10 kilorad . . . . . . . . . . 10 krad 11 rad . . . . . . . . . . . . 10*-2* rad 12 millirad . . . . . . . . . . 10*-5* mrad ------------------------------------------------------------------------------ -- -----------

Added by 1965 No. 13 r. 23; amended by 1968 No. 150 r. 13; 1977 No. 150 r. 19;

1979 No. 65 r. 6

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 31

## SCH

SCHEDULE 31

Regulation 82

PERMISSIBLE VARIATION UPON VERIFICATION OR REVERIFICATION OF CERTAIN

SUBSIDIARY STANDARDS OF MEASUREMENT

------------------------------------------------------------------------------ -- First Column Second Column

Denomination of Standard Permissible Variation ------------------------------------------------------------------------------ -- A. Standards of Measurement of Length expressed in terms of the Metre or Units

related to the Metre in Schedule 1

Permissible variation in millimetres

Denominations exceeding 32 metres . . . One-tenth of the denomination of the

standard in metres

Denominations exceeding 15 metres but

not exceeding 32 metres Five-hundredths of the denomination of the standard in metres

Denominations exceeding 2 millimetres

but not exceeding 15 metres Two-tenths of the square root of the

denomination of the standard in metres Denominations not exceeding 2

millimetres 0.01

B. Standards of Measurement of Length expressed in terms of the Yard or Units

related to the Yard in Schedule 1

Permissible variation in inches

Denominations exceeding 35 yards . . . Four-thousandths of the denomination

of the standard in yards

Denominations exceeding 50 feet but not

exceeding 35 yards Two-thousandths of the denomination of the standard in yards

Denominations exceeding 0.07 inches but

not exceeding 50 feet Five-thousandths of the square root of the denomination of the standard in

feet

Denominations not exceeding 0.07 inches 0.0004

C. Standards of Measurement of Mass that are not constructed of iron, expressed

in terms of the Kilogram or Units related to the Kilogram in Schedule 3

Permissible variation in milligrams

Denominations exceeding 10 kilgrams . . Eight times the denomination of the

standard in kilograms

Denominations exceeding 1 milligram but

not exceeding 10 kilograms Eight-tenths of the square root of the denomination of the standard in grams

Denominations not exceeding 1 milligram 0.025

D. Standards of Measurement of Mass, that are not constructed of iron, expressed in terms of the Pound or Units (other than the Grain) related to the Pound in

Schedule 3

Permissible variations in grains

Denominations exceeding 50 pounds . . . Six-hundredths of the denomination of

the standard in pounds

Denominations exceeding 3 drams but not

exceeding 50 pounds Four-tenths of the square root of the

denomination of the standard in pounds Denominations not exceeding 3 drams . . 0.05

E. Standards of Measurement of Mass expressed in terms of the Grain

Permissible variation in grains

Denominations exceeding 0.01 grain . . Three-thousandths of the square root

of the denomination of the standard in grains

Denominations not exceeding 0.01 grain 0.0003

F. Standards of Measurement of Mass expressed in terms of the Metric Carat

Permissible variation in milligrams

Denominations exceeding 0.02 metric

carat Eight-hundreths of the square root of

the denomination of the standard in

metric carats

Denominations not exceeding 0.02 metric

carat . . . . . . . . . . . . . . . . . 0.01

G. Standards of Measurement of Mass expressed in terms of Units related to the

Grain in Schedule 3

Permissible variation in grains

Denominations exceeding 300 troy ounces

. . Four-thousandths of the denomination

of the standard in troy ounces

Denominations exceeding 0.01 grain but

not exceeding 300 troy ounces Three-thousandths of the square root

of the denomination of the standard in grains

Denominations not exceeding 0.01 grain 0.0003

H. Standards of Measurement of Volume expressed in terms of the Cubic Metre or

Units related to the Cubic Metre in Schedule 4

Permissible variation in cubic

centimetres

Denominations exceeding 0.05 cubic

metre Six hundred times the denomination of

the standard in cubic metres

Denominations exceeding 0.5 cubic

centimetre but not exceeding 0.05 cubic

metre Two-hundredths of the cube root of the square of the denomination of the

standard in cubic centimetres

Denominations not exceeding 0.5 cubic

centimetre 0.01

I. Standards of Measurement of Volume expressed in terms of the Cubic Yard or

Units related to the Cubic Yard in Schedule 4

Permissible variation in minims

Denominations exceeding 2 cubic feet . Two hundred and fifty times the

denomination of the standard in cubic

feet

Denominations exceeding 0.03 cubic inch

but not exceeding 2 cubic feet Three hundred times the cube root of

the square of the denomination of the

standard in cubic feet

Denominations not exceeding 0.03 cubic

inch . . . . . . . . . . . . . . . . . 0.2

J. Standards of Measurement of Volume expressed in terms of the Gallon or Units

(other than the Fluid Ounce, Fluid Drachm and Minim) related to the Gallon in

Schedule 4

Permissible error in minims

Denominations exceeding 10 gallons . . Fifty times the denominations of the

standard in gallons

Denominations not exceeding 10 gallons One hundred times the cube root of the square of the denomination of the

standard in gallons

K. Standards of Measurement of Volume expressed in terms of the Fluid

Ounce,Fluid Drachm or Minim

Permissible error in minims

Denominations exceeding 20 minims . . . Twice the cube root of the square of

the denomination of the standard in

fluid ounces

Denominations not exceeding 20 minims . 0.2

L. Standards of Measurement of Area expressed in terms of the Square Metre or

Units related to the Square Metre in Schedule 2

Permissible variation in square metres Denominations exceeding 0.6 square

metre Three-thousandths of the denomination

of the standard in square metres

Denominations not exceeding 0.6 square

metre 0.0018

M. Standards of Measurement of Area expressed in terms of the Square Yard or

Units related to the Square Yard in Schedule 2

Permissible variation in square feet

Denominations exceeding 6 square feet . Three-thousandths of the denomination

of the standard in square feet

Denominations not exceeding 6 square

feet . . 0.018

------------------------------------------------------------------------------ -- -----------

Added by 1968 No. 150 r. 14; amended by 1977 No. 150 r. 19; 1979 No. 65 r. 7

WEIGHTS AND MEASURES (NATIONAL STANDARDS) REGULATIONS - SCHEDULE 32

## SCH

SCHEDULE 32

Regulation 83

PERMISSIBLE VARIATION UPON VERIFICATION OR REVERIFICATION OF CERTAIN

SUBSIDIARY STANDARDS OF MEASUREMENT THAT ARE CONSTRUCTED OF IRON

------------------------------------------------------------------------------ -- First Column Second Column Third Column

Limit of accuracy of

Denomination of Standard Permissible variation verification

------------------------------------------------------------------------------ -- A. Standards of Measurement of Mass that are constructed of iron, expressed in

terms of the Kilogram or Units related to the Kilogram in Schedule 3

Permissible variation Limit of accuracy of

in grams verification in grams

Denominations exceeding

25 kilograms Seven-hundredths of the

denomination of the

standard in kilograms Seven-thousandths of

the denomination of the standard in kilograms

Denominations exceeding

1 kilogram but not

exceeding 25 kilograms Thirty-five-hundredths

of the square root of

the denomination of the

standard in kilograms Thirty-five-thousandths of the square root of

the denomination of the standard in kilograms

B. Standards of Measurement of Mass that are constructed of iron and expressed

in terms of the Pound or Units related to the Pound in Schedule 3

Permissible variation Limit of accuracy of

in drams verification in drams

Denominations exceeding

50 pounds Eighteen-thousandths of

the denomination of the

standard in pounds Eighteen-tenthousandths of the denomination of

the standard in pounds

Denominations exceeding

2 pounds but not

exceeding 50 pounds Thirteen-hundredths of

the square root of the

denomination of the

standard in pounds Thirteen-thousandths of the square root of the

denomination of the

standard in pounds

------------------------------------------------------------------------------ -- -----------

*2* * * * * * * *

## SCH

------------------------------------------------------------------------------ --

*2* The Schedules-As originally made, these Regulations contained 23 Schedules. The Twenty-fourth to the Thirtieth Schedules were added from 1965 to 1967. By Statutory Rules 1979 No. 60, the First to the Twenty-third Schedules (inclusive) were substituted by Schedules 1 to 23, and Schedules 24 to 30 were added (regulation 5). The Twenty-fourth and Twenty-fifth Schedules were amended and re-numbered Schedules 31 and 32 respectively (regulations 6 and 7), and the Twenty-sixth to the Thirtieth Schedules (inclusive) were repealed (regulation 8).